Categories
THC Project

Keypad – work in progress, part 2 – 20/1/09

I’ve started doing the wood work,

Now that I have all the electronics I need for the keypad, and I have a fairly good concept of what I need to do after a test drilling I went on and started building the operational thing.

first I had to make the keys themselfs. I took the Laptop keys written on and covered with laquce (see previews post on the subject), and glued it to the pushbuttons I’ve bought.

Next was to construct a wooden box, I’ve choped off some old furnichers I found on the street, and drilled holes for the PBs.

Keypad - Before drillingKeypad - Post Drill

The box – before and after drilling

After this is done, I’ve mounted everything to make sure it fits. and off it does into paint.

keypad-prepaint2
Keypad – Before going into Paint

Leave a Reply